Y&D owns 4 calendered and gluing machine in dust-free workshop, to makes the high-end adhesive vinyl depending on customer’s requirement. Now we launch 3 levels quality of vinyl.It is Super, Good and Economic series.
Printing vinyl can be used on outdoor and indoor, different applications have different requirement on the adhesive. For outdoor using, we will adjust strong adhesive; and for indoor using, we will use removable adhesive instead. And different environment will affect the performance of the glue. We will adjust the formula depends on the specific environment.
Y&D innovate and create banner depending on different climatic environment, and using requirement. Try our best to be outstanding on the ink absorption, smoothness and tensile strength. And Y&D will offer the best stock management and delivery time.
When the water level within the waterer reaches a certain level, a valve is triggered causing the waterer to automatically fill up with water from a pressurized water line. When the water reaches the preset water level, the valve closes to stop the flow of water. When animals drink from the waterer they are causing the valve to open and to start the refilling process.
Complete installation instructions for your unit can be downloaded here. J&D recommends the following basic guidelines: • Place unit on a concrete pad to help with drainage and to prevent a mud hole from forming. • Caulk or weather strip the base of the waterer to the concrete pad. This helps with wind penetration. • Make sure electrical units are installed by a qualified electrician. A properly grounded receptacle unit acceptable for outdoor use will need to be installed and protected from the weather. • A qualified plumber should bury the water supply line below the ground freeze line. • Use an Insulated Earth Tube to help prevent freezing in cold climates.
There are many things you can do to make sure your J&D Poly Livestock Waterer is operating properly in the cold winter months: • Protect your unit from wind and snow. This will help reduce your energy costs as well as help prevent freeze ups. Don't forget to keep it in a location that your animals can easily access. • In order to keep the water moving in the unit, there must be a minimum number of animals drinking from the waterer. The number of animals depends on the size of the waterer. Remember that the animals that drink from the waterer triggers the valve to allow water exchange. • Clean and maintain your unit regularly. Drippings from the animals' mouths can cause ice build-up. • Use an insulated earth tube.
An earth tube is located under the ground around the water supply line. It is highly recommended for cold climates. You many need more than one depending on the depth. This tube allows the movement of air that has been warmed by the geothermal heat around the water supply line to keep it from freezing. The warm air is generated from the ground below the frost line.
Using a J&D Poly Livestock Waterer provides fresh and clean water to your livestock 24 hours a day, 365 days of the year. The automatic water refill and low daily maintenance is a time saver for you and your employees. The constant refreshing of the water supply reduces algae growth and eliminates stagnant water to help prevent diseases like West Nile Virus. J&D Poly Livestock Waterers will not crack or rust in extreme weather conditions.
J&D Manufacturing offers a 5 (five) year warranty on all Poly Livestock Waterers. This warranty covers defects in the material or workmanship. The warranty is limited to the value of the defective part and does not include any freight charges, loss of production and/or changes in operation. It does not cover damage due to careless machine handling and neglect. We also offer a 1 (one) year warranty on the float and valve, electrical heating pad, thermostat, and submersible heater. Note: To ensure the life of your electric livestock waterer, be sure that the waterer is drained and shut off when not in use.
On the Energy Free and some of the Electric units, cleaning is as easy as shutting off the water supply, pulling the drain plug so the water can drain out easily and quickly and then wiping clean. On the tip tanks, just tip the tank to empty the water and wipe clean.
NO.561, C.H.Industrial Park,
Whats App: +8613702954768